12
SE LP10 Integrated Wired
With and Without MELR Option (Electric Latch Retraction)
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights
reserved. Reproduction in whole or in part without the express written permission of ASSA
ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Fig. 1A
Fig. 2
Fig. 1B Metal Door Shown
1 Door Preparation
A. Verify Hand and Bevel of Door
B. Door Preparation
2 Rod and Inner Case Installation
1. Refer to instruction sheet
FM438
for rod and inner
case installation on
metal
doors.
2. Refer to instruction sheet
FM436
for rod and inner
case installation on
wood
doors.
• Check hand of door. The Multi-Point lock may be handed.
• Door should be fitted and hung
• Verify box label for size of the Multi-Point lock, function
and hand
• Change hand (if necessary)
Left Hand
Reverse
LHR
Outside
Inside
Right Hand
Reverse
RHR
Prepare door according to appropriate template. If necessary,
refer to
www.corbinrusswin.com
.
• Metal door (MD/AD)
FM438
- Template: T31242
• Wood door (WD)
FM436
- Template: T31243
7) Installation Instructions
