8
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
ED5200N Series Exit Devices For
9100 IN120 Series Trim
5) Rim Exit Installation Instructions (Continued)
Fig. 5b (door not shown)
Tailpiece
Fig. 5d
Tighten
securely
Fig. 5a
Outside Face of
Door
5. Install Exit Device:
a. Feed trim harness through upper hole in cutout (Fig. 5a).
b. Seat device against door being careful to align vertical trim tailpiece to engage with
cross hole of device cam -
see Figure 5b.
c. Fasten device to trim assembly using (2) 1/4-20 pan head screws (Fig. 5c).
d. Follow instructions packed with device to secure device to door.
e. Tighten all (4) screws (Fig. 5d).
Inside Face of
Door
Fig. 5c
Tailpiece
Door
Position
Switch
