7
Troubleshooting
If you experience any difficulties with the operation of your CORD subwoofer, please
check the table below before contacting a service centre.
Problem
Possible cause
Remedy
No Power - no indicator light
•
AC Power cord is out
•
AC socket switch is OFF
•
Connect the AC Power cord
•
Switch ON the AC socket
No Sound
•
AC Power cord disconnected
•
AC socket switch is OFF
•
Subwoofer In cable is out
•
Subwoofer Out is OFF in the
source amplifier/receiver
•
Speaker cables are out
•
Level is adjusted too low
•
Operation switch is set to OFF
•
Connect the AC Power cord
•
Switch ON the AC socket
•
Connect the subwoofer cable
•
Refer to the source amplifier
receiver owners' manual
•
Connect the speaker cables
•
Increase Level adjustment
•
Set Operation switch to ON
Unusual sound or thumping
•
Error in music data
•
Excessive volume level
•
Try different music
•
Reduce volume level
General
•
Check all cables and
accessories
•
No bass level from source
software
•
Incompatible software
•
Substitute cables for known
good cables
•
Change software
•
Check amplifier/receiver
compatibility with Dolby/DTS
Under no circumstances should you attempt to repair this product
yourself. Please refer all servicing to qualified personnel.
No user serviceable parts are used in this product. Removing the
rear cover and tampering will void your warranty.
Summary of Contents for sub-eight
Page 1: ...sub eight owners manual ...
Page 12: ...SUBEIGHT SEP 08 AB ...
