Page 5
5.
Loosen the seat pop pin and pull outwards then
insert the seat post assembly (718-6016) into the
frame.
6.
With the seat post sleeve fl ush into the frame, use
a #2 phillips screwdriver to install two (2) pieces
of the M4 x 16mm pan head screw (110-3164) to
secure the sleeve to the frame.
Seat Adjustment: To adjust the seat, turn the seat
adjustment pop pin counter-clockwise then pull
outwards. While pulling outwards on the pin, raise
or lower the seat to a comfortable position. Once
the seat is in the desired position, release the knob,
ensuring the pin locks into the seat post and turn
clockwise to tighten.
7.
Unpack the console, console mounting screws,
and console install wiring instructions (620-8657)
from the console box.
8.
Set the lower rear panel (020-7958) into place on
the mast, then install the back console shroud
(701-0344-XX).
