Page 6
9.
Use a #2 phillips screwdriver and attach the back
shroud of the console to the console mount
using eight (8) pieces each of the of the #8-18
x 3/4” pan head screw (110-3402) and M4 fl at
washer (120-3307).
10.
Use a #2 phillips screwdriver to secure the back
shroud to the rear panel using four (4) of the #8-
18 x 3/8” pan head screws (731-0584).
11.
See console install sheet (620-8657) in order to
connect the console to the base.
620-8657
12.
After connecting the console to the base, use
a #2 phillips screwdriver to secure the console
front to the rear shroud using six (6) of the 8-18 x
3/4” pan head screws.
