Page 12
18.
Once the machine is in its final position,
level the unit by turning the four leveling
feet on the bottom rear of the frame
until all four feet are contacting the floor
and the unit is stable.
19.
Use a 19mm open-ended wrench
to tighten the lock nut to ensure the
leveling feet are locked into position.
Fig. 19
20.
Install Console. For 10” touchscreen,
skip ahead to page 13.
10” LCD CONSOLE
a. On the numeric keypad, press
and hold the
,
and
keys together. The Service Menu
will display.
Fig. 20
b. Use direction buttons to navi-
gate.
c. Press the
button to enter
Maintenance Mode.
Fig. 21
