Page 10
CONSOLE KEY FUNCTIONS
QUICK START Key
Enables manual operation using a default weight, SPEED and a default time limit.
NOTE: Default time and weight are adjustable through Maintenance Mode.
Fan Button
Cycles the fan between three settings: High, Low and Off
Numeric Keypad
Use to enter specific values for program parameters during program setup.
During a program, these keys may be used to change level.
Up/Down Buttons
Cycle between options during setup mode, adjust incline & speed up and down
during workout mode
BLUETOOTH DEVICE PAIRING
Bluetooth Device Pairing with Bluetooth Button:
Pushing the button puts the console into
discover mode. The console will be available for pairing for up to 60 seconds to pair with a
compatible App. The button will flash while searching for pairing, and the display will show the
unique console code. Once a device is paired with the console, the light will stop flashing and
remain on to indicate the connection. Visit our website for a list of compatible Apps.
Pairing with Apple Watch:
OpenHub consoles marked with this icon
have the
capability to connect using Near Field Communication (NFC) with Apple Watch (must be
running WatchOS 4.2 or later and have option
Detect Gym Equipment
set to
On
in Watch settings for
Workout App.)
Pairing with Samsung Galaxy Watch:
OpenHub consoles marked with the Samsung
icon also have the capability to connect with Samsung Galaxy Watch (must be running
software 4.8 or later and have
NFC
set to
On
)
1
.
To connect:
Hold the watch near the
icon on the console (this is where the NFC reader is located). When
the display and watch detect each other, the Bluetooth button on the display will flash and then turn solid blue,
and watch will ask user to confirm connection with the display. Once connection is confirmed by user, it will
finalize and data will begin to pass between console and watch. It is possible to make this connection either
before the workout begins (recommended), or at any time during an active workout. At the end of workout, the
connection will be terminated.
Note:
when Apple Watch is connected to display, the Calories display window will show both Active and Total
Calories per Apple Watch calculations.
1 See
support.corehandf.com/Software
for version numbers and update instructions
