Page 22
Maintenance Mode allows access to service and diagnostic information, as well as provides the ability to adjust
certain program default parameters. To enter Maintenance Mode:
1.
Press and hold the
,
and
keys together.
2.
A beep will sound and “MAINTENANCE MODE” will display momentarily in the Information Window.
3.
Release all keys. “SERIAL NO
#####
” will display in the Information Window.
The following keys are available in MAINTENANCE MODE:
Incline Keys
Increase and Decrease LEVEL Keys:
Adjust the value of the
displayed parameter up and down, respectively, in increments of 1 unit.
These keys do not save the new value.
Numeric Keypad
Numeric Keypad:
Allows you to enter specific values for numeric
parameters. These keys do not save the new value.
OK Key
Updates (saves) the values of all parameters in non-volatile memory,
and exits Maintenance Mode.
NOTE:
To exit Maintenance Mode without saving any values or settings, press the QUICK START key.
A complete list of the items that you may display and change in Maintenance Mode:
Item
Lowest
Value
Highest
Value
Default
Notes
Vx.xx Sum
N/A
N/A
V958
6C92FBD4
Update software
N/A
N/A
Update console software via USB
contrast
0
100
100
Display contrast setting
backlight
10
200
200
Display backlight setting
WD
N/A
N/A
on/off
pd time
N/A
N/A
on/off
Person Detect
Burn in mode
N/A
(Manufacture Only)
Elev Calibration
Elevation calibration function
motor calibration
Motor calibration function
cal values
Resets Console to default factory settings
error list
List of last errors
error stats
N/A
N/A
Count of errors
serial # port tests
N/A
N/A
Access to Serial Port Test function
heartrate test
N/A
N/A
Access to Heart Rate System Test function
keypad test
N/A
N/A
Access to Keypad Test function
LCD OPENHUB CONSOLE
MAINTENANCE MODE
