Page 24
Fig. 17
Accessing the Service Menu
Speed Calibration Procedure
1.
On the numeric keypad, press and hold the
,
and
keys together. The Service Menu will
display.
2.
A beep will sound and “MAINTENANCE MODE” will display momentarily in the Information Window.
3.
Release all keys. “SERIAL NO
#####
” will display in the Information Window.
4.
Use the incline keys to navigate.
5.
Navigate to
Motor Calibration
6.
Tap the
key to begin elevation calibration.
WARNING:
Do not stand on moving surface during calibration.
Elevation Calibration Procedure
1.
On the numeric keypad, press and hold the
,
and
keys together. The Service Menu will
display.
2.
A beep will sound and “MAINTENANCE MODE” will display momentarily in the Information Window.
3.
Release all keys. “SERIAL NO
#####
” will display in the Information Window.
4.
Use the incline keys to navigate.
5.
Navigate to
Elev Calibration
6.
Tap the
key to begin elevation calibration.
WARNING:
Do not stand on moving surface during calibration.
CALIBRATION - OPENHUB LCD