6
CORE
H
OME
G
LUTE
D
RIVE
O
WNER
’
S
M
ANUAL
Setup and Assembly
1. Unpacking the Home Glute Drive
Carefully place the box right side up as indicated on
packaging in an open area and remove packing straps.
Remove top of box, carefully remove packing materials.
Lift unit from box holding on to main frame base and
rear legs, do not lift from back pad. Place unit in desired
area and remove wrapping.
2. Set up for Glute Drive use
For use in the Glute Drive position carefully lift back
pad from the top (transport wheel end) and place the
rear support legs into the channel lock as shown.
Pull the lock pin as you place the support in the
channel lock and then
ensure the lock pin is fully
engaged
as shown. See user exercise guide for
additional
instruction
on
positioning,
adding
resistance and belt adjustment.
3. Set up for exercise bench use
For use in the flat bench position lift pad from foot
platform end and hook the arm into the keyhole slots.
As shown in the diagram.
Pull the pop pin t-handle to disengage and lower the rear support leg, allowing the weldment to rest on the main frame as
shown. Lift the rear tube weldment (transport wheel
end) and depress the lever on the bench to allow the
positioning of the rear tube weldment into the
brackets as shown in figure 1.
