8
Copyright by CORE INSIGHT, INC.
This user manual contents may change without pre-notification.
A. Cautions
Use of proper input voltage to avoid damaging the system.
Verify the cabling and its connection between controller, junction box
and individual ceiling emitters before turn on the system.
Disconnection cable from ceiling emiiters will damage the system.
Do not clean emiter point while the system is powered. This may result
of additional contamination issue and possible electrical shock.
Do not open the system by un-authorized personnel while the system
is powered. This will void the warranty and may result in addtional cost.
B. Personal Safety
Before performing any maintenance on emitter points, it is highly
recommended turn-off the system. Allow few minutes for high voltage
power supplies to discharge.
Cautions and Personal Safety
4
