STEP 7: Install the base cover.
Insert the bottom of the base cover to the connector of the base frame
of the main body from top to bottom (pictured below). Secure with
screws.
STEP 6: Reset the main body.
Connect the power cord and remote controller. Turn on the main
power switch. Press the power button twice and wait 30 seconds.
The main body will automatically reset its position.
STEP 8: Install Armrest
Lift the front of the armrest higher than the rear, then secure the rear (1) onto
the main body. Pull on the spring release cord as you push the arm towards
the main body, then release the cord.
Lower the front of the armrest and connect the power cord and air hose.
11
12
CHAIR INSTALLATION
CHAIR INSTALLATION
