13
14
15
IMPORTANT NOTICE
Please avoid opening all drawers or
doors simultaneously as this could
cause your furniture to fall forwards.
Where there is a risk of this occurring,
especially in environments with
children or uneven floors we
recommend that this item of furniture
is attached to your wall using
appropriate fixings (supplied).
WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING.
IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED).
- Place fixing strip against the wall and mark position for drilling hole.
- Drill hole in your wall to a depth of 30mm using a 6mm drill bit. If the surface of your wall is soft and crumbly, we would advise you
to use a 5mm drill bit for a tighter fit.
- Insert plug into hole with end flush to the wall surface.
- Attach fixing strip to the wall using the 25mm screw + washer and securely tighten.
- Pre-drill small pilot hole on the back edge of the furniture top using a 2mm drill bit. Attach the other end of fixing strip to the back
edge of the furniture top using the 14mm screw + washer and securely tighten.
-
Y
Y
14mm
14mm
25mm
16
16
21
14
15
21
N
N
N
N
N
N
N
N
!
1ª
2ª
3ª
1ª
2ª
3ª
ADJUSTING HINGE
N
N
N
x12
GOLD
Ø3,5
14mm
P3
