Core Products TX915, Manual

16

J

J

J

J

J

J

J

J

19

!

1ª

2ª

3ª

1ª

2ª

3ª

ADJUSTING HINGE

IMPORTANT NOTICE

Please avoid opening all drawers or doors 
simultaneously as this could cause your furniture
to fall forwards. Where there is a risk of this
occurring, especially in environments with children
or uneven floors we recommend that this item of 
furniture is attached to your wall using appropriate 
fixings (supplied).

Y

WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING.

IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED).

- Place fixing strip against the wall and mark position for drilling hole.
- Drill hole in your wall to a depth of 30mm using a 6mm drill bit. If the surface of your wall is soft and crumbly, we would advise you 
  to use a 5mm drill bit for a tighter fit.
- Insert plug into hole with end flush to the wall surface.
- Attach fixing strip to the wall using the 25mm screw + washer and securely tighten.
- Pre-drill small pilot hole on the back edge of the furniture top using a 2mm drill bit. Attach the other end of fixing strip to the back
  edge of the furniture top using the 14mm screw + washer and securely tighten.
-

Y

x01

Y

14mm

14mm

25mm

17

J

GOLD

x04

Ø3,5

14mm

P3