12
WALL-MOUNTING THE CHARGER (OPTIONAL)
The battery charger can be mounted to a permanent surface, such
as a wall or work bench. Use mounting fasteners (not included)
capable of supporting the combined weight of the battery and
battery charger. Wall-mounting holes are located on the bottom of
the charger (Fig. 2).
Fig. 2
Wall-Mounting
Holes
ASSEMBLY
WARNING:
To avoid serious personal injury and
damage to the unit, stop the motor and remove the battery
before installing or removing the blower tube.
Fig. 1
Blower Outlet
Blower Tube
Tab
Slot
WARNING:
To prevent serious personal injury, never
operate the unit without the blower tube firmly installed.
INSTALLING AND REMOVING THE BLOWER TUBE
Installing the Blower Tube
1. Set the unit on a flat, level surface.
2. Align the slot on the blower tube with the tab on the blower
outlet (Fig. 1).
3. Push the blower tube onto the blower outlet until the tab locks
securely into the slot (Fig. 1).
Removing the Blower Tube
1. Set the unit on a flat, level surface.
2. Firmly press the tab inward and pull the blower tube off of the
blower outlet (Fig. 1).