Corega BTHS02, User Manual

28

BTHS02 User Manual

29

6.2 Power On/Off the headset

《

Power On

》

Press and hold [



] button for 4 seconds. While you see the LED flashes 

blue light for 4 times and hear two short high tones, release [



] but-

ton, then it will be powered on.

《

Power Off

》

Press and hold [



] button for 4 seconds. While you see the LED flashes 

red light for 4 times and hear two low tones, release [



] button, then 

it will be powered off.

6.3 Pairing

You are required to pair the headset with your mobile phone or other 
devices before using it.

1. The headset must be powered off before initiating pairing. To initiate 

pairing, press and hold [



] button for 7 seconds until the blue and 

red indicators of headset are flashing alternatively. If you are wear-
ing the headset during the pairing process, you will hear two short 
high tones when the headset is ready for pairing.

2. Initiate pairing process of your mobile phone. Refer to the manual of 

mobile phone for detail process. You will see a new item “CG-BTHS02” 
added in your Bluetooth device list after searching process.

3. You will be asked to enter pin-code to complete pairing. Please enter 

[1234] and confirm it. 

* Note:  

1. [1234] is the default pin-code.
2. The red indicator of headset will turn off and the blue indicator will flash 

slowly after pairing completed successfully.

3. If the headset is not in pairing mode, your mobile phone won’t find the 

headset. Please set the headset on pairing mode before the mobile phone 
search for the headset.

4. If no pairing is possible for a period of time (approx. two minutes), the 

headset will automatically power off, and so the previous pairing (if any) is 
revoked. You may need to repeat steps 1 to 3 until pairing succeeds.