Corema GAMMA 250 MONO, Operating Instructions Manual

English

Ice cream freezer

6

3

T

ECHNICAL

DATA

3.1

Technical data plate and CE marking

The technical data and CE mark plate must not be removed. It is positioned on the machine's rear side and shows:

—

manufacturer's name and address [F];

—

model's denomination [MOD] and serial number [S/N];

—

types [GAS] and quantities [gr] of refrigerating gases included;

—

year of manufacturing [ANNO];

—

tension [V], frequency [Hz] and number of phases [Ph], electrical input power [kW] and current [A];

—

CE mark.

—

the symbol for the dismantling of the product [G].

3.2

Acoustic pressure level

The average equivalent continuous acoustic pressure level of this machine is quoted in the Technical Handbook (Technical
Data section). This data has been measured at 1 meter from the surface of the machine and at 1.60 meters from ground-
level, during the machine’s functioning.

4

C

ARRYING

AND

UNPACKING

Note:

We suggest you to let the Assistance Service or qualified technicians carry out the transportation, un-
packing and installation.

T

O

LIFT

THE

MACHINE

ALWAYS

USE

AN

ADEQUATE

LIFTING

DEVICE

. A

TTEMPTING

TO

LIFT

IT

MANUALLY

IS

DANGEROUS

AND

CAN

DAMAGE

YOUR

HEALTH

.

The machine’s weight specifications, both inclusive of packaging and net, can be
found in both the supplied documents and on the packaging itself.

To prevent the oil contained in the compressor to flow into the refrigerating circuit, it is neces-
sary to always keep the machine in upright position, both during carrying and during the instal-
lation and operation. Always follow the instructions on the packing.