P16.XY20 Piezo Nanopositioning Scanner User Manual
14
8. Connector
FIG.10 1-contact LEMO
FIG.11 4-contacts LEMO
8.1 Driving and Sensor Connector
The driving connector adopts a 1-contact lemo connector. The model is LEMO ERA.00.250.
CTL as shown below:
The sensor connector adopts the 4-contacts lemo, model LEMO ERA.0s.304.CLL, as showne
below:
Note:Open-loop products have only PZT drive line, no sensor line.
FIG. 12 Definition of Sensor Connector
Note: The open loop product only has drive connector, no sensor connector.
The bridge connection mode and pin definition of strain gauge are as follows: