EM 9250
Operator’s manual
75
UK
- by inserting the forks of a lift truck under the machine so that the centre of the forks
correspond approximately to the centre line of the body (Fig. 3).
2
3
CAUTION
Always unplug the power supply cable from the socket before moving the machine.
CAUTION
Never apply force to the wheel spin shaft when moving the machine.
INSTALLATION
CAUTION
Take the utmost care when unpacking, assembling, lifting and setting up the machine
as indicated below.
Failure to observe these instructions can damage the machine and compromise the
operator's safety.
Remove the original packaging materials after positioning them as indicated on the packaging
and
keep them intact so the machine can be safely shipped at a later date if necessary
.
CAUTION
Choose the place of installation in compliance with local regulations on occupational
safety.
In particular, the machine must only be installed and used in protected environments
where there is no risk of anything dripping onto it.
