Technical Support Manual – 05/2015 Rel. 0
Page 7
RET
Return
This option allows you to return to the SERVICE mode, as shown in figures F2.14 and F2.15.
Figure F2.14: Return message
Figure F2.15: SERVICE mode message
3. MENU PARAMETERS ACCESS (with password)
The Parameters MENU allows you to run various operations reserved to technical personnel, such as re-setting the revolution counter
- SPIN. To access the Parameters MENU, proceed as follows:
1.
Enter the SERVICE mode by pressing [F+P3]
;
2.
Press [F+P5]
to access the Parameters MENU;
3.
A password is required to enter this menu. Enter the password by pressing the keys in the sequence indicated within 5
seconds, or the machine will return to SERVICE mode:
a)
[P2]
b)
[P4]
c)
[P5]
d)
[P9]
The password must not be disclosed to the end user, as he/she may accidentally modify the machine configuration;
4.
Browse the list of the menus with keys [P4]
or [P5]
until the option required is displayed. The menu options
available are listed in table T3.1;
Table T3.1: Parameters Menu Option
Options
Description
Notes
SPn
Reset the revolution counter
Ret
Return to SERVICE mode
5.
Press keys [F+P5]
to confirm the option;
6.
Some programs require additional confirmation to continue (the flashing message
yEs
is displayed). Press [F+P5]
to confirm or any other key to cancel;
7.
To exit the Parameters Menu, select option
Ret
and press keys [F+P5]
.
Summary of Contents for MEC 1
Page 1: ...EQUILIBRATRICI MEC 1 MEC 1 BAT TECHNICAL SUPPORT MANUAL UK...
Page 2: ......
Page 18: ......
