ED150-8V “K” Style Lid Kit Installation Instructions
© 1998-2010, IMI Cornelius Inc.
- 1 -
Publication Number: 620912201
INSTALLATION INSTRUCTIONS
F
OR
ED150-8V “K” S
TYLE
L
ID
K
ITS
, P/N 630200153
AND
630000191
These “K” style kits apply to the following ice makers:
!
WARNING:
Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the
user. Verify that all the power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or
the equipment manufacturer’s instructions.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All of the attachment screws and plates must be installed as directed in this manual.
Failure to comply could result in serious injury, death or damage to the equipment.
1.
Unpack the kit.
2.
Place insulation strip (item 12) over studs on the baffle and Insert baffle assembly into the adapter lid.
3.
Place (2) sealing washers (item 9) over studs and (2) flat washers (item11), then fasten in place with (2) plastic
acorn nuts (item 8).
4.
Set ice maker lid on the top of the dispenser.
Table 1. Applicable Models
Ice Maker
Width
Cornelius 322/522
22I
Crystal Tips 200/300/400
22”
Ice-O-Matic
22”
Manitowoc 320/420
22”
Scotsman SLC 300/400
22”
Servend S2/4
22”
Table 2. Loose Shipped Parts
Item No.
Part No.
Name
Qty.
1
52994
Cover, Gray (630000191)
1
52934
Cover, Black (630200153)
1
2
620028801
Lid Assembly
1
3
22127
Bracket
2
4
70217
#8 Screw
12
5
50904
RTV
1
6
90221
Label
1
7
620912201
Installation Instruction
1
8
620701902
Acorn Nut, 8-32 Nylon
2
9
620701901
Sealing Washer
2
10
620037007
Baffle, Ice DF/ED150
1
11
621701903
#8 Nylon Washer
2
12
620505804
Insulation Strip
1
Release Date: November 9, 2010
www.cornelius.com
Revision: B
