IDC Pro 255 Service Manual
Publication Number: 621058649SER
- 22 -
© 2016, Cornelius Inc.
Figure 38
The service screen has a few layout changes, however the access levels remain the same. You have the ability to change
your default pass-codes.
Row 1 of the service screen shows what will be displayed when the operators level pass-code is entered.
Row 2 is displayed when the manager level pass-code is entered. This level has visibility to levels 1 and 2.
Row 3 is displayed when the technician level pass-code is entered. This level has visibility to all 3 levels.
NOTE: The Shutdown button is available on all levels.
.
I
NITIAL
S
ETUP
Before operating the unit, perform the initial setup described in the following sections.
Mapping Brands
To map the valves to the available brands, perform the procedure in Table 16.
Table 16.
Step
Action
1
Display the keypad screen by tapping each corner
of the video screen Starting in the upper right cor-
ner (1) and continuing to tap each corner in a
Counter clockwise direction in a sequence of
1,2,3 and 4 as shown in Figure 39.
NOTE: As each corner is touched, a small
confirmation rectangle may
momentarily appear to confirm the
touch.
Figure 39.
