UC100 ProGate Operator’s Manual
Publication Number: 621054211OPR
- 4 -
© 2008-2014, Cornelius Inc.
2.
The current default table is displayed in the menu.
3.
The arrow buttons can now be used to move through the four tables.
4.
To exit without programming, press and hold the “P” button for three (3) seconds to exit.
5.
To reset to a new table, select the table using the arrow buttons.
6.
Press and hold the “M” button for three (3) seconds, the display flashes twice when the new setting
is accepted.
7.
Exit by pressing and holding the “P” button for three (3) seconds.
To view the Data Table, perform the following steps:
1.
Use the arrow buttons and move to the DATA table. Data is displayed.
2.
Press a size button to see how many dispenses of that size have been done on the dispenser.
3.
Press the “M” button to see the total number of dispenses on the dispenser.
4.
LED display is limited to four digits or “9999” dispenses.
5.
Exit by pressing and holding the “P” button for three (3) seconds.
Manual Operation
If the unit fails to operate properly, users may manually obtain ice from the hopper by opening the lid and
using the “size specific scoop” to scoop out ice. Figure 2 shows the unit with the ice hopper with the cover
open and the cup holder in place.
Figure 2
M
AINTENANCE
WARNING: Disconnect Power Before Cleaning! Do not use metal scrapers, sharp objects,
or abrasives on the ice storage hopper, top cover, and agitator disk. Do not use solvents or
other cleaning agents because they may damage the plastic.
Soap solution – Use a mixture of mild detergent and warm (100
o
F) potable water.
Sanitizing solution – Dissolve one packet of Kay-5 Sanitizer/Cleaner into 2-1/2 gallons of water to ensure
100 ppm of available chlorine.
The following dispenser maintenance should be performed at the intervals indicated:.
Ice Hopper
Scoop Holder
Summary of Contents for Starbucks UC100
Page 4: ......
Page 14: ...UC100 ProGate Operator s Manual Publication Number 621054211OPR 10 2008 2014 Cornelius Inc ...
Page 15: ......
