5
OPERATING INSTRUCTIONS
4
IMPORTANT SAFETY INSTRUCTIONS
OPERATING INSTRUCTIONS
Read all these instructions before attempting to operate this product and save these
instructions for future reference.
•
This fan is designed for a 220-240V~ 50Hz electric supply.
•
Before cleaning or moving the fan, make sure it is unplugged. When unplugging, grip the rubber part of the
plug and do not pull the lead wire.
•
Do not pull the plug with wet hand to avoid electrical shock.
•
Does not damage, excessively bend, stretch, intertwine, and press the electrical cord. Do not replace electrical
cord yourself. If the electric cable is damaged, it must be replaced by qualified person in order to avoid a
danger.
•
Do not put any foreign body in the inlet or outlet. That will cause dangers or lower the power of the wind.
•
Avoid water dripping and being close to fire. Avoid any inhale of inflammable or explosive objects.
•
Do not spray pesticide or detergent to the fan to avoid any damage to the rubber finish.
•
When fan not in use for a long time, please turn off all the switch and unplug the fan.
•
Do not repair the fan yourself. It must be done by qualified person.
•
Locate the fan on the level ground, do not operate it leanly or lying on the ground.
•
When moving the fan, unplug it and graph the handle at the back and move it.
•
Avoid using this fan in an area with high humidity or full of dust.
•
Keep this fan out of reach from Children or infirm persons. Do not let them use the appliances without
supervision.
•
When operating the fan, do not put your finger or other objects into the grille.
OPERATING METHOD
•
Fill water into water tank, then install the water tank onto the assemble entrance. Please be sure that the water
tank has been fastened to the back cover. (Please refer to picture 1).
•
Put the machine to a stable place, insert the plug into the socket, press on/speed key to start the fan. (Please
refer to picture 2).
Picture 1
Picture 2
1
2
4
5
6
3
ReMote CoNtRol
1. Operate Ion function
2. Operate rotate function
3. Operate on/wind speed
4. Operate mist function
5. Turn off
6. Timing
CoNtRol PaNel
led display Screen
1. wind speed icon
2. fan function icon
3. rotation icon
4. Ion function icon
5. Timer icon
6. Power on icon
7. Flashing icon
8. Misting icon
Buttons
9. Turn off button
10. On/ Speed button
11. Mist button
12. Ion function button
13. Rotate function button
14. Timing button
