6
FS-EP Series
380V/400V/415V
REVISION # 0000
DATE: 03/22/2021
6. When the operator assembly is attached to the door bracket, be sure the door driven sprocket is
properly aligned with the operator drive sprocket before securing the driven sprocket to the shaft.
(See Figure 1 for 1/3hp and 1/2hp; see Figure 2 for the 3/4hp)
7. The shelf or bracket must provide adequate support for the operator. Prevent play between the
operator and the door shaft. The operator must be securely attached with the drive shaft parallel to
the door shaft. It may be necessary to field brace the operator/bracket.
Door
Sprocket
Operator
Drive
Sprocket
Correct
Incorrect
(Figure 1 for 1/3 hp and 1/2 hp)
Door
Sprocket
Operator
Drive
Sprocket
Correct
Incorrect
(Figure 2 for 3/4 hp)
Summary of Contents for FS-36EP Series
