Page 7
SRP-003-545 • Issue 4 • July 2004
10. Connector Panels
10.1
LANscape
connector panels (Figure 12)
are generally shipped separately with connector
adapters installed.
10.2
If fibers are not already connectorized,
install connectors onto the fibers using pigtail
splicing or direct connectorization per
manufacturer’s instructions. If installing BTF
kits, proceed to section 12.
Figure 12
Figure 13
Figure 14
Splice
Tray
Holder
Splice
Tray
Holder
Bracket
NOTE:
Pigtails are fiber optic cables with
connectors on one end which are installed into
connector panels. The other end is terminated in a
splice tray.
10.3
Remove the splice tray holder from the
housing (Figure 13).
10.4
Install connectors
into the appropriate
panels (Figure 14).
Buffer Tubes
Pigtail
