Installation Manual | CMA-794-AEN | Page 20
MOUNT THE EU-O ON THE WALL
Attach Handle to EU-O
Attach the 19-inch mounting brackets to the rear of the EU-O, using 4 screws M3×16 per bracket
and the Phillips screwdriver. Observe the orientation of the brackets.
Figure 30.
Attaching a 19-in Mounting Bracket
Mount EU-O to Wall
Figure 31.
Marking the Position of Mounting Holes
1. Hold the EU-O to the installation
location and mark the position of
the 4 mounting holes in the
mounting brackets; see arrows in
Figure 18.
2. Drill the mounting holes according
to the chosen mounting
accessories.
Figure 32.
Mounting Completed
1. Attach the dowels, expansion
screws, and fasten the EU-O to
the wall.
