Corning Restricted
C o r n in g O pt ic a l Com m un ic at io ns
Us e r Ma n ua l I C MA - 48 2 - A E N I P a ge 5
Warnings and Admonishments
There may be situations, particularly for workplace environments near high-powered RF sources, where recommended limits
for safe exposure of human beings to RF energy could be exceeded. In such cases, restrictive measures or actions may be
necessary to ensure the safe use of RF energy.
The equipment has been designed and constructed to prevent, as far as reasonably, practicable danger. Any work activity on
or near equipment involving installation, operation or maintenance must be, as far as reasonably, free from danger.
Where there is a risk of damage to electrical systems involving adverse weather, extreme temperatures, wet, corrosive or
dirty conditions, flammable or explosive atmospheres, the system must be suitably installed to prevent danger.
Equipment provided for the purpose of protecting individuals from electrical risk must be suitable for the purpose and properly
maintained and used. This covers a range of activities including lifting, lowering, pushing, pulling, carrying, moving, holding or
restraining an object, animal or person from the equipment. It also covers activities that require the use of force or effort, such
as pulling a lever, or operating power tools.
Where some of the above-mentioned activities are required, the equipment must be handled with care to avoid being
damaged.
Observe standard precautions for handling ESD-sensitive devices. Assume that all solid-state electronic devices are ESD-
sensitive. Ensure the use of a grounded wrist strap or equivalent while working with ESD-sensitive devices. Transport, store,
and handle ESD-sensitive devices in static-safe environments.
Regulatory Compliance Information
WARNINGS!
•
This is
NOT
a
CONSUMER
device. It is designed for installation by
FCC LICENCEES
and
QUALIFIED INSTALLERS
.
You
MUST
have an
FCC LICENSE
or express consent of an FCC Licensee to operate this device. Unauthorized use may
result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation.
•
ANTENNAS
: Use only authorized and approved antennas, cables and/or coupling devices! The use of unapproved
antennas, cables or coupling devices could cause damage and may be of violation of FCC regulations. The use of
unapproved antennas, cables and/or coupling devices is illegal under FCC regulations and may subject the user to fines.
See section 3.6 of this document.
•
RxU67
:
Part 90 and Part 20 Signal Booster. THIS IS A 90.219 CLASS B DEVICE WARNING
. This is
NOT
a
CONSUMER
device. It is designed for installation by
FCC LICENSEES
and
QUALIFIED INSTALLERS
. You MUST have
an
FCC LICENSE
or express consent of an FCC Licensee to operate this device. You MUST register PART 90 Class B
signal boosters (as defined in 47 CFR 90.219) online at
www.fcc.gov/signal-boosters/registration
. Unauthorized use may
result in a significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Patent:
http://www.corning.com/worldwide/en/patent-notices.html
