Corning Restricted
C o r n in g O pt ic a l Com m un ic at io ns
Us e r Man u al I C MA - 4 82 - A E N I P a g e 4 8
Additional required item (not included):
¼ in bolts (x7) for mounting bracket on wall
4.3.3.2
Installing Wall Mount Bracket and Mounting RAU5x
1. Using the provided drilling template, mark a minimum of four holes to mount the bracket (if drilling only four holes, mark
the four outer corner holes).
Note: Image of drilling pattern with required distances also appears in Appendix A: Bracket Dimensions.
IMPORTANT!
RAU5x requires 3 in clearing from the surface on the back and front, top and bottom to allow for proper
cooling airflow and for heat dissipation.
Figure 4-19. Required 3-Inch Clearance from Surface