4
Unisub 1U, Unisub 1U Splitter
3. Opening side conversion
3.1
Remove screws from top and bottom of the hinge. It
might be necessary to use open end wrench to hold nut.
3.2
Push out spring plunger from its socket...
3.3
Use all parts from point
3.1
to fix hinge on the other
side of subrack. Final step is to remove tube holder from
left mounting plate and fix it to the right (also at the bottom).
Note:
make sure to collect and re-use all parts: screw,
nut and nylon spacer.
Note:
above operation can be also carried out after
installation in the frame, however it requires free space
above and below subrack.
PRESS
PRESS
... and press it in on the other side of the subrack.
nut
