- 19 -
EVO1ST
such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place by a metal screw.
ADAPTER
GROUNDING PIN
GROUNDED OUTLET
GROUNDED OUTLET BOX
NOT ALLOWED
METAL SCREW
Voltage supply higher than 120 V
This product is for use on a circuit having a nominal rating more than 120 V and is factory-equipped with a specific
electric cord and plug for connection to a proper electric circuit.
Only connect the product to an outlet having the same configuration as the plug. Do not use an adapter with this
product.
When the product must be reconnected for use on a different type of electric circuit, the reconnection shall be made
by qualified service personnel.
Extension cords
WARNING
Manufacturer strongly recommends NOT using an extension cord with this equipment.
Use only a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot receptacle that will accept the plug on
the product. Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. For lengths
less than 25 feet, no. 18 AWG extension cords should be used.
An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
Note - The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in
doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.
Ampere
Rating
Range
Volt
Length of cord in feet (ft.)
120 V
25 ft.
50
100
150
200
250
300
400
500
240 V
50 ft.
100
200
300
400
500
600
800
1000
0 - 2
18
18
18
16
16
14
14
12
12
2 - 3
18
18
16
14
14
12
12
10
10
3 - 4
18
18
16
14
12
12
10
10
8
4 - 5
18
18
14
12
12
10
10
8
8
5 - 6
18
16
14
12
10
10
8
8
6
6 - 8
18
16
12
10
10
8
6
6
6
8 - 10
18
14
12
10
8
8
6
6
4
10 - 12
16
14
10
8
8
6
6
4
4
12 - 14
16
12
10
8
6
6
6
4
2
14 - 16
16
12
10
8
6
6
4
4
2
16 - 18
14
12
8
8
6
4
4
2
2
18 - 20
14
12
8
6
6
4
4
2
2
