18 of 80
CORRADI SPA - USER MANUAL - EXPERIENCE
2 - 04.2014
WarnInGS anD PrECautIonS
PrELIMInarY CHECKS
When you receive the packaged goods, if assembly is not to be
carried out by the dealer, check that all materials are intact and
that no parts are missing.
If you should have any problems, contact the authorised dealer.
DISPoSaL oF PaCKaGInG MatErIaLS
Divide the various packaging according to the material used
(cardboard, nylon, polystyrene etc.) and dispose of them
separately in compliance with the regulations in force.
GEnEraL WarnInGS
Before undertaking any assembly, maintenance or cleaning
operations, make sure that you have fully understood the
indications in this manual.
All Corradi SpA products have a specific function described
in this manual. Any other use not envisaged here, the use of
non-original components, or any unauthorised tampering and/
or technical modification, relieves Corradi SpA of any liability
for harm to persons or animals, or damage to objects resulting
from such intervention.
Installers must have specific expertise as well as the aptitude
and the physical and mental requirements to be able to carry
out their tasks; they must also respect the safety regulations in
force.
SaFEtY PrECautIonS
It is good practice to bear in mind that any moving component
can constitute a hazard.
Power must always be off (in the motorised model) during
product maintenance, repairs or adjustments. A warning sign
should also be posted on the main power switch with the
following message:
“DO NOT TOUCH: work in progress”.
Check that no one is near the awning before turning it on again
after maintenance work. After maintenance, always make sure
that manual and electric drives are properly assembled and that
they work correctly; should you encounter any problems stop
the awning immediately and contact Corradi SpÀs technical
assistance department.
DEMoLItIon
At the end of the product’s lifetime, plastic parts must be
separated and taken to an appropriate recycling centre
according to current regulations.
Metal parts should be divided up into stainless steel and other
non-ferrous metals or alloys, for correct recycling.