78 de 80
CORRADI SPA - MAnuAl Del uSuARIO - eXPeRIenCe
2 - 04.2014
MantEnIMIEnto
LIMPIEZA
Los tratamientos superficiales de los perfiles de aluminio -tanto
de anodización como de pintura- son de la mejor calidad y
constantemente controlados. De todos modos, se recomienda
realizar una limpieza periódica (al menos tres veces por año)
mediante el lavado de las partes de aluminio con agua y
detergente neutro. Se debe evitar absolutamente el uso de
productos alcalinos, ácidos o abrasivos, solventes orgánicos
o detergentes de composición química desconocida. Las
superficies y los detergentes utilizados durante el lavado deben
estar a una temperatura máxima de 20 °C. No utilice lavadoras
de vapor. La limpieza se debe realizar con mayor frecuencia en
zonas muy salinas o en presencia de sustancias contaminantes
particulares.
Para obtener un buen deslizamiento de los carros, mantenga
limpias las guías inferior y superior; verifique que todas las
juntas estén bien limpias (si es necesario, límpielas con un paño
húmedo).
Con el objetivo de mantener la correcta capacidad de
evacuación del agua pluvial de la estructura, es esencial
verificar periódicamente que los orificios de drenaje no estén
obstruidos por cuerpos extraños (grumos de polvo, residuos
de hojas o detritos de cualquier tipo) que impidan el flujo
espontáneo de agua.
En cuanto respecta a los accesorios de movimiento y cierre, para
conservar en el tiempo su correcto funcionamiento, controle
periódicamente (al menos una vez por año) las partes móviles,
verificando el ajuste de los tornillos de fijación y sustituyendo
los elementos excesivamente desgastados. Limpie y lubrique
las piezas en contacto utilizando aceite silicónico.
Si se deben realizar trabajos de albañilería de una cierta
importancia, es necesario proteger cuidadosamente las
superficies, ya que el contacto con mortero húmedo, yeso u
otros materiales puede causar daños a los perfiles de aluminio
(corrosión, etc.).
ELIMINACIÓN
El cerramiento no contiene materiales que comporten riesgos
para las personas o para el ambiente. Para su eliminación, debe
ser entregado a un centro autorizado para la recogida selectiva
de los materiales que lo componen.
NOTA:
La irradiación solar provoca el natural calentamiento de las
superficies expuestas (externas) que, especialmente en caso de
acabado de color muy oscuro, pueden alcanzar temperaturas
relativamente elevadas (60 °C o más); por el contrario, cuando
las condiciones climáticas externas son particularmente
rígidas, la temperatura de las superficies expuestas (externas)
puede descender significativamente (incluso por debajo de
0 °C). Como consecuencia, dado que el aluminio es un buen
conductor térmico, se puede verificar el inconveniente de
tener las superficies internas de los perfiles a una temperatura
muy alta (con la correspondiente molestia e incluso el peligro
de quemaduras al tocar y maniobrar los cerramientos) o
demasiado baja (con posible formación de condensación).
Tome las debidas precauciones.