13
38
n
Installing Batteries (continued)
n
Charging Handset
3. T o
r e p l a c e
t h e
b a t t e r y
cover, slide the cover up
until it snaps in place.
The batteries need to be replaced if
they do not recover their full storage
capacities after recharging.
When replacing the batteries, always
use good quality Ni-MH re-chargeable
batteries. Never use other batteries
or conventional alkaline batteries.
Notes
:
! Important Note
YOU SHOULD FULLY
CHARGE THE HANDSET
15
: Before initial operation,
for about
hours.
To charge the handset, you should place it on the base.
Result:
When you place the handset on the base, the handset
automatically turns on and the
indicator lights on
during the charge.
Charge
The
adjustment
allows
you
to
optimize
the
visibility of the display by changing its contrast
according to the environment conditions.
1. Press the
soft key.
2. Press
or
key to choose
,
then press the
.
3.
or
key repeatedly to choose
, then press the
soft key.
4. Use
or
key repeatedly to choose among
the 17 available contrast levels, then press the
soft key.
5. Press the
key to return to standby mode.
Menu
H
LCD
Contrast
Select
Save
S Settings
Select
soft key
Press
LCD Contrast Setting
3.
or
key to choose
menu, press the
soft key.
4. Use
or
key to choose
or
, press the
soft key.
5. You can use
or
key to choose the Date
Format (
/
) or the Time Format
(
/
), press the
soft key
to save.
2. Press
or
key to choose
or
menu, press the
soft key.
3. Enter the current date/time by numeric keypad
and press the
soft key to save and exit.
Date & Time
Select
Date Format
Time Format
Select
DD-MM MM-DD
12-Hour 24-Hour
Save
Set Date
Set
Time
Select
Save
2. Setting date & time
Press
1. Perform steps 1 to 3 of previous paragraph.
Setting Date & Time
1. Date & Time Format
1. Press the
soft key.
2. Press
or
key to choose
,
then press the
.
Menu
HS Settings
Select
soft key
Notes
12-Hour AM PM
:
If you select
,
/
will appear
on the right of the time in standby mode.
At step 3 you need to enter the time in 24-
Hour format.
