background image

19 

 

4.8

 

Application 

4.8.1

 

SMS 

1.

 

Press Menu ->Applications->Enter->SMS->Enter. 

2.

 

Use the navigation keys to highlight the options. Messages can be read in the 

Inbox/Outbox. 

3.

 

Press Reply to reply to a message.    Use the 2aB softkey to change the Input Method.   

After entering the reply, press OK, use the navigation keys to select the line from which 

you want to send, then press Send. 

4.

 

To write a new message, press New. Use the 2aB softkey to change the Input Method.   

After entering the reply, press OK, use the navigation keys to select the line from which 

you want to send, and press Send. 

5.

 

To delete a message, press Del.    You have three options to choose: Yes, All, No. 

4.8.2

 

Memo 

Memos can be recorded in the phone as reminders. 

Press Menu->Application->Memo->Enter->Add. 

Options for Mode, Date, Time, and Ring Tone can then be configured.    The reminder text 

can also be entered.    When the configuration is completed, press Save. 

4.8.3

 

Voice Mail 

1.

 

Press Menu->Application->Voice Mail->Enter. 

2.

 

Use the navigation keys to highlight the line for which you want to set voicemail. 

3.

 

Press Edit 

4.

 

Use the navigation keys to enable voicemail. 

5.

 

Input the number. Press 2aB softkey if necessary to change the input method. 

6.

 

Press Save to save the change. 

7.

 

To hear a new voicemail, press the Voicemail softkey.    Then press Dial.    It may then be 

necessary to enter a password. 

4.8.4

 

Ping 

1.

 

Press Menu->Application->Ping->Enter. 

2.

 

Enter the IP Address to be pinged.   

3.

 

Press Start 

4.

 

Display will show “Ping IP Address” 

5.

 

After approximately 5 seconds, the display will show “OK” if the ping is successful or 
“Failed” is the ping is unsuccessful. 

Summary of Contents for C60





















































































Reviews: