T
ELEPHONE
F
EATURES
TONE DIALING
The Medallion 3200 is capable of only DTMF dialing. This phone is not compatible with
pulse dialing.
RECEIVING A PHONE CALL
1.
When the phone rings, lift the handset or press the
SPEAKER-
PHONE
button to begin your conversation.
2.
To change the Ringer Volume, refer to the “Factory Presets” section.
PLACING A PHONE CALL
1.
Lift the handset or press the
SPEAKERPHONE
button and wait for a dial tone.
2.
Dial the telephone number you wish to call. The number will appear on the display
window.
PREDIAL
1.
While the handset is on hook, enter the desired telephone number using the key
pad. The number will appear in the display. To delete a digit or the entire number,
press the
REVIEW DOWN
(
)
button.
2.
To dial the displayed number, lift the handset, press the
SPEAKERPHONE
button or
press the DIAL button.
SPEAKERPHONE BUTTON
(AC Adaptor must be used to ensure proper function)
1.
Receiving Incoming Calls
a.
When the phone rings
,
press and release the
SPEAKERPHONE
button and talk normally into the built-in microphone from a
distance of 5-6 inches.
b.
You can adjust the volume of the caller’s voice by by pressing the Volume Bar
on the base of the telephone.
c.
After the conversation has finished, press and release the
SPEAKERPHONE
button to hang up.
2.
Making A Call
a.
Press and release the
SPEAKERPHONE
button.
b.
When you hear a dial tone, dial the number or press the auto memory
button. The number will appear on the display window.
6