Cortelco Sentry 8790 Operating Instructions Manual Download

Page: 25 / 25

- 24-

LIMITED WARRANTY

If you purchased this product new in the U.S. or Puerto Rico,

CORTELCO

warrants it against defects in

material and workmanship for a period of one (1) year from the date of original purchase. This warranty is in

lieu of all other express warranties. During the warranty period,

CORTELCO

agrees to repair or, at its option,

replace the defective product, or any part of it without charge for parts or labor. This is your exclusive remedy.

This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or

operation, lack of reasonable care, the affixing of any attachment not provided by

CORTELCO

with the product

and loss of parts. The warranty is voided in the event any unauthorized person alters or repairs the unit.

Telephone companies use different types of equipment and offer various types of services to customers.

CORTELCO does not warrant that this product is compatible with the type of equipment of any

particular phone company or the services provided by it

CORTELCO

DISCLAIMS ANY IMPLIED WARRANTY, INCLUDING THE WARRANTY OF

MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AS OF THE

DATE ONE YEAR FROM THE ORIGINAL PURCHASE OF THE PRODUCT.

CORTELCO

ASSUMES NO

RESPONSIBILITY FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS, WHICH

VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED

WARRANTY LASTS, SO THE ABOVE EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.

If failure occurs and your Call Waiting ID is in warranty, service shall be provided by returning it to

CORTELCO -

Repair Center, 1703 Sawyer Road, Corinth, Mississippi 38834, shipping prepaid

. The product will be repaired or

replaced if examination by us determines the product to be defective. Call Waiting IDs received damaged as a result of
shipping will require you to file a claim with the carrier.

879015 TP2 27S

Revision 3

01-2005

Summary of Contents for Sentry 8790


























Search results

Summary of Contents for Sentry 8790

Reviews:

Related manuals for Sentry 8790

Brands by name

Popular brands

Cortelco Sentry 8790, Operating Instructions Manual

Search results

Summary of Contents for Sentry 8790

Reviews:

Related manuals for Sentry 8790

Brands by name

Popular brands