5
II. CARE INSTRUCTIONS
•
Lubricate moving joints with silicon spray after periods of usage.
•
Be careful not to damage plastic or metal parts of the machine with heavy or sharp objects.
•
The machine can be kept clean by wiping it down using dry cloth.
•
Check and adjust the tension of wire rope on a regular basis.
•
Regularly check all moving parts and make sure there are signs of wear and damage, if any the use of
the device must be stopped immediately and contact our after-sales department.
•
During inspection, it is necessary to make sure that all bolts and nuts are completely fixed. If any bolt
or nut connection is loosened, please re-tighten.
•
Check weld for cracks.
•
Failure to perform daily maintenance may result in personal injury or equipment damage.
CARE INSTRUCTIONS |
