2.
Connect 20-pin plug from step 1 to installation harness 20-pin
connector (white) (See
Fig. 2
).
Fig. 2
installation harness
3.
Connect installation harness 20-pin plug (black/gray) (See
Fig. 2
) to
radio 20-pin connector vacated in step 1
4.
Connect included 3.5mm male-male cable (See
Fig. 3
) to “AUX” input
jack on module (See
Fig. 4
), Other end connects to AUX device (within
3 ft.)
Fig. 3
Fig. 4
5.
Connect installation harness 22-pin plug (See
Fig. 2
) to module 22-pin
connector (See
Fig. 5
)
6.
Connect push button with built-in microphone (See
Fig. 6
) to module
(MIC/CTR) input jack (See
Fig. 4
)
Fig. 5
Fig. 6
push button/Microphone
