Fig. 12
Module USB port
3.
Push USB (See
Fig. 13
) until it snaps in place and flush with mounting
surface (See
Fig. 14
)
Fig. 13
Flush mount USB Terminal
Fig. 14
Flush mounted to dash
4.
Tuck and secure any extra wire from moving parts and test operation
B.
USB with Bracket Mount
(No drilling)
1.
Locate a flat surface at location of choice within 3.2 ft. of radio and
mount USB support bracket (See
Fig. 15
) to surface with screws.
Fig. 15
USB mounting bracket
2.
Insert USB male terminal through hole in bracket (See
Fig. 16
) and
connect to USB port on Module (See
Fig. 4
)
Fig. 16
3.
Push USB head until it snaps in place and flush (See
Fig. 17
)
Fig. 17
4.
Secure USB to dash with screws (included) or adhesive.
5.
Tuck and secure any extra wire away from moving parts and test
operation (
See Bluetooth Pairing and Connection
)
