background image

 

 

- 4 -

5. Make sure all parts are assembled, nuts and bolts are tightened 

6. Do not use the treadmill if the unit is disassembled in any way 

7. When connecting the power cord, plug the power cord into a grounded circuit. No other appliance 

should be on the same circuit. Do not run the power cord underneath your treadmill. Do not operate the 

treadmill with a damaged or frayed power cord. 

8. Keep hands away from moving parts 

9. 

Please note that there is a weight limitation for this product. If your weight more than 110kgs. It is not 

recommended that you use this product. Serious injury may occur if the user weight exceeds the limit 

shown here. This product is not intended to support users whose weight exceeds this limit. 

10. This equipment is for home use only. Never allow more than one person on the treadmill at a time. 

11. Wear appropriate exercise clothing when using the treadmill. Do not wear loose clothing that could become 

caught in the treadmill. Athletic support clothes are recommended for both men and women. Always wear 

athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals. Do not wear 

shoes with leather soles or high heels. Tie all long hair back 

12. Do not rock the unit from side to side   

13. Don’t continuously use this equipment over an hour. 

14. Care should be taken when mounting and dismounting the unit   

15. Do not place any liquids on any part of the treadmill 

16. To prevent shock, keep all electric components, such as the motor cord and switch away from water. 

17. Do not use any accessories that are not specifically recommended by the manufacturer, these might cause 

injuries or cause the unit to fail   

18. Work within your recommended exercise level, do NOT work to exhaustion 

19. If you feel any pain or abnormal systems STOP YOUR WORKOUT IMMEDIATELY and consult your 

physician immediately 

20. Turn off the treadmill while adjusting or working near the rear roller. 

21. Keep one side of the magnetic safe key CLIPPING your clothes during exercising to avoid danger 

happening. 

22. Incorrect or excessive training may lead injures. 

23. This equipment is not suitable for therapeutic purposes. 

24. Don’t open this equipment cover to avoid damage usually. 

25. Ensure the load place is level and free space at least 1m around for safe operation. 

26

. This equipment is not a toy. Please keep unsupervised children away from the equipment during 

use and when equipment is unattended.

 

 

 

 

 

Summary of Contents for SX-2277




















Reviews: