34
35
continued on next page.
Belt-Positioning Booster
Installation
Place child restraint against
the back of the vehicle
seat.
NOTE:
Tuck the
top anchorage strap and
hook under the child
restraint.
Place the child’s bottom
and back flat against the
child restraint.
1
2
Place lap belt across child’s
thighs. Lock buckle.
NOTE:
If your child
restraint has armrests,
make sure the lap and
shoulder belt are placed
under armrest as shown.
Secure the shoulder belt
through one of the notches
in the shoulder belt guide.
The belt should cross the
base of the child's neck and
across the chest (not the
face or neck). Pull up on
the shoulder belt to
tighten.
Check periodically to
ensure your child has not
moved out of position and
loosened the shoulder belt.
3
WARNING
!
For vehicles with an air bag, but without a
back seat, refer to your vehicle owner’s
manual.
Do Not Use only the lap
belt when using this seat
as a belt-positioning
booster without the
internal harness.
The shoulder belt must
always be adjusted snugly
across the child’s chest.
NEVER place the
shoulder belt under the
child’s arms.
Failure to follow these
warnings can result in serious injury or
death to your child.
Belt-P
ositioning Booster Use:
30-80 lbs.
(14-36 kg),
29-52” (73-132 cm),
Ov
er 1 y
ear of age
.
4358-3188 Singles 12/31/03 9:35 AM Page 37
