2
Depending on your model,
loosen harness by lifting
up (A)
OR
pushing down
(B) on the harness release
lever. Pull out on harness.
12
Preparing Child Restraint to Fit
Your Child
You MUST make these adjustments with your
child before you install the child restraint in the
vehicle.
Make sure LATCH belt
packaging is pulled free of
child restraint shell.
1
3
Press on harness retainer
release button and pull
apart.
Press red button on buckle
to release the buckle
plates. Place harness over
sides of child restraint.
4
A
B
5
Place the child’s bottom
and back flat against the
child restraint.This will
increase comfort and allow
the harness to properly
tighten.
13
continued on next page.
Harness
Guide
6
Check Harness Height
Forward-Facing
Position:
Harness guide
must be
even with or
just above
the shoulders.
If the top harness guides
are below the child’s
shoulders, the child
weighs at least 30 lbs. (14
kg) and is over 1 year
old, convert the seat to a
belt-positioning booster.
Refer to weight and
height chart.
7
Determine which set of
harness guide slots works
best for your child. Adjust
if needed.
4358-3188 Singles 12/31/03 9:35 AM Page 15