Installing Harness System
18
4.
Rethread Harness
Strap
With sewn end of
harness strap loop
facing the buckle,
thread harness strap
down through hip harness slot.
1.
Insert Buckle’s
Metal Retainer into
Slot Closest to Child
Buckle
MUST
face out.
You
MUST
use the 1st
or 2nd buckle slots
when child restraint is
used rear facing. Any slot can be used
when forward facing.
3.
Check Buckle
Pull up on buckle
to make sure it is
secured.
The buckle
MUST
not
pull out.
2.
Pull Metal
Retainer
Completely
Through Pad
and Shell
1
2
3
continued on next page
7.
Thread Buckle
and Chest Clip
Harness strap ends
go through the
back
of buckle tongues
and through the chest
clip
front to back
as
shown.
6.
Make Harness
Strap Even
Sewn ends of
harness strap loops
MUST
face each
other.
17
If you will be
using the lowest
shoulder harness
slots,
you
MUST
pull up front of seat
pad and weave
harness strap in
and out of shell as shown. Replace
seat pad.
5.
Pull Harness
Strap Across
Bottom of Shell
Harness strap
MUST
lie in front of harness
adjustment strap as
shown. Push harness
strap up through
other hip harness
slot.
4358-6590B Scenera NEXT.indd 16-17
4358-6590B Scenera NEXT.indd 16-17
5/6/15 3:25 PM
5/6/15 3:25 PM