MAINTENANCE
CAUTION:
NEVER PUT YOUR HAND INSIDE OF THE UNIT WHILE
ITS OPERATING. FOR THE BEST PERFORMANCE CLEAN YOUR
RANGE HOOD REGULARLY.
CLEANING
1. Use only mild soap or cleaning solutions to clean the hoods’ outer surface.
Dry surfaces using a soft cloth.
2. Stainless Steel cleaner may be used on the external surface.
3. Clean the Range Hood
motor
assembly
every
1 to 3 months depending on use.
4. DO NOT
clean the motor or electrical components with water or any
other liquid.
REPLACING LIGHT BULBS
CAUTION:
LAMP UNIT MAY BE HOT! WAIT UNTIL THE UNIT IS COOL.
BEFORE ATTEMPTING TO REPLACE THE LED LAMPS MAKE SURE
THE UNIT IS POWERED OFF AND UNPLUGGED.
1. Remove the aluminum filters
2. Disconnect the wire for the LED light being replaced.
3. Reach your hand into the unit and push the LED light housing out of
the hole to remove it. Replace the LED light and connect the wire.
4. Reinstall the aluminum filters
1
5
MAINTENANCE
CAUTION:
NEVER PUT YOUR HAND INSIDE OF THE UNIT WHILE ITS OPERATING
.
FOR
THE BEST PERFORMANCE CLEAN YOUR
RANGE HOOD REGULARLY
.
CLEANING
1.
Use only mild soap or cleaning solutions to clean the hoods'
outer surface. Dry surfaces using a soft cloth.
2. Stainless Steel cleaner may be used on the external surface.
3
. Clean the Range Hood assembly
1
to
3
months depending on use.
4
.
DO NOT
clean the motor or electrical components with water or
any other liquid.
REPLACING LIGHT BULB
S
CAUTION:
LAMP UNIT MAY BE HOT
!
WAIT UNTIL THE UNIT IS COOL
. B
EFORE
A
TTEMPTING TO REPLACE THE
LED
LAMPS MAKE SURE THE UNIT IS POWERED OFF AND
UNPLUGGED
.
1. Remove the
aluminum
filters
2.
Disconnect the wire for the LED light being replaced.
3.
Reach your hand into the unit and push the LED light housing out of the
hole to remove it. Replace the LED light and connect the wire.
4
. Reinstall the
aluminum
filters.
15
Press on the center and
twist to lock into place.
Carbon Filter
Twist to Unlock
PRODUCT P
ARTS
COS-5U30
