background image

ALUMINUM FILTERS

3

ALUMINUM FILTERS

About Your New Filters

Aluminum Filters are recommened to be replaced every 

4-

6 months depending 

on usage.

Cleaning my Aluminum Filters

Your filters can be hand washed and cleaned to increase time between 

replacements. Aluminum Filters 

should

 not be placed in the dishwasher. 

Additional Aluminum or Charcoal Filters can be purchased from 

www.cosmoappliances.com

3

ALUMINUM FILTERS

About Your New Filters

Aluminum Filters are recommened to be replaced every 

4-

6 months depending 

on usage.

Cleaning my Aluminum Filters

Your filters can be hand washed and cleaned to increase time between 

replacements. Aluminum Filters 

should

 not be placed in the dishwasher. 

Additional Aluminum or Charcoal Filters can be purchased from 

www.cosmoappliances.com

About Your New Filters

 

Aluminum filters are recommened to be replaced every 4-6 
months depending on usage.

Cleaning my Aluminum Filters

 

Your filters can be hand washed and cleaned to increase time  
between replacements. Aluminum filters should not be placed
in the dishwasher.

Additional Aluminum or Charcoal Filters can be purchased from: 

www.cosmoappliances.com

2

Summary of Contents for COS-5U SERIES




















Reviews: