7
NOTE: This is extremely important! Please check before planning for service.
CORRECT REPLACEMENT OF THE
BURNERS
It is very important to check that
the burner flame spreader "F" and
the cap "C" have been correctly
positioned (see figs. 3.1 and 3.2).
Failure to do so can cause serious
problems.
In appliances with electric ignition
check that the electrode "S"
(fig. 3.1) is always clean to ensure trouble-free
sparking.
The ignition plug must be very
carefully cleaned.
CORRECT POSITION OF TRIPLE RING
FLAME BURNER
The triple ring burner must be correctly
positioned (see fig. 3.3); the
burner rib must be filled in their
housing as shown by the arrow.
The burner correctly positioned
must not rotate (fig. 3.4).
Then position the cap A and the
ring B (fig. 3.4 - 3.5).
Summary of Contents for COS-HZ5230
Page 13: ...13 GAS CONNECTION SPECIFICATION...
Page 18: ...18 WIRING DIAGRAM IGNITION...
