22
6.3.2 - models AXIA-H, ECOPLUS, ECOBI, INKAS, NOVADENS, INKADENS
and CIELODENS
ERRORS DISPLAYED BY CR04
ERRORS DISPLAYED BY BOILER
ERROR 01 L01
ERROR 04 L46
ERROR 06 L05
ERROR 07 L07
ERROR 11 L03
ERROR 15 L45
ERROR 17 L17
ERROR 18 L25
ERROR 18 E01
ERROR 20 L19
ERROR 23 L32
ERROR 24 L02
ERROR 36 E50
ERROR 41 L20
ERROR 41 E20
ERROR 46 E21
ERROR 47 E22
ERROR 56 E07
ERROR 57 E02
ERROR 63 L33
ERROR 64 E17
ERROR 65 E12
ERROR 66 E11
ERROR 70 E51
For the correspondence of errors displayed in boiler to refer to the installation manual of the boiler to the chapter
Diagnostic
6.4 - Setting the language
Pressing down the KM key for more than 10 seconds and then key K4 (>>), it is possible to access page 2 of the
menus.
Using key K1 (LING), the menu for selecting the user language is selected.
The wording corresponding to the set language (Italian, French or English) is shown on the display.
Using keys K+ o K- it is possible to select the desired language from among those available:
· ITALIANO (Italian)
· FRANCAIS (French)
· ENGLISH
By pressing key K4 (OK), the choice is confirmed and the display returns to show page 1 of the menu.
Return to operating mode takes place automatically, after 2 minutes have elapsed, or by pressing key KM down
for 10 seconds.
The language selected is memorized within an Eeprom-type memory, which stores this information even if the
power is cut to the remote control.
6.5 - Operating parameters - PAR Menu
Not available
6.6 - Operating parameters - PARC Menu
Not available
