53
MYDENS 60
G
A
C
E
D
F
B
020005.01.007
COSMOGAS
Figure 8.1 - removing the casing and opening of command board
8.2 - Removing the casing and
access to internal components
Proceed as follows to remove the casing (refer to figure
8.1):
1.- loosen the screws “A”;
2.- pull the lower part of the front-piece “B” towards the front
and then slide it out upwards until it is released from the
guides “C”;
To access the command and control board:
1.- turn the command board “D” towards the front;
2.- open the commands board “D” by operating on closure
“G”;
To access the electric connections board:
1.- turn the command board “D” towards the front;
2.- slide lid “E” out by operating on the closing flaps
“F”;
8 - MAINTENANCE
