Troubleshooting Guide
Important
U.S. Version
This System is supplied with a 3 connector Plug and must be connected to a 115 volt, 60 Hz,
standard power outlet.
Problem
Solution
No Power to Biarritz
Check in house breaker panel,
make sure breaker is on.
Check GFCI on Biarritz for default
condition. Reset if required.
Green Power Indicator on
Check GFCI for default.
Biarritz does not illuminate
condition. Reset GFCI.
Check and/or replace F1 fuse
on Main Control Box.
Chair does not operate
Check all above.
Make certain connector to
chair is securely made.
Check to see that remote
Control is “ON”.
Chair Turns “OFF” after 15 or 30 minutes
Check Timing Mode on Remote
Control and set accordingly.
Jets Do Not Operate
Check all Power Connections
to Biarritz.
Push Air Button Switch for
Jets firmly.
Make sure Power is applied
and Green Light is “ON”.
Biarritz™ Installation Manual v.1.3 - 29
Product Code: LM917135
www.spaequip.com
P: 707.737.1100 F: 707.737.1150
Page 17 of 18
